12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter)

The 12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) is a flexible LED lighting strip designed to provide bright cold white illumination for indoor lighting and decorative applications. It uses high-brightness 5050 SMD (Surface Mount Device) LEDs mounted on a flexible printed circuit board (PCB), making it suitable for home lighting, commercial displays, architectural lighting, cabinets, shelves, signboards, and DIY electronics projects. This strip operates from a 12V DC power supply and is intended for indoor use only due to its IP20 non-waterproof design.

The LED strip is manufactured using a flexible PCB, 5050 SMD cold white LEDs, current-limiting resistors, copper conductive traces, connection pads, and a self-adhesive backing for easy installation. The flexible construction allows the strip to be bent around corners and installed on both flat and curved surfaces.

The working principle of the 12V Cold White 5050 LED Strip is simple. When a regulated 12V DC power supply is connected, electrical current flows through the LED circuits. The current-limiting resistors regulate the current supplied to each LED group, allowing the 5050 SMD LEDs to emit a bright cold white light (typically around 6000K–6500K). The LEDs are connected in multiple sections, allowing the strip to be cut at marked cutting points without affecting the remaining sections.

Typical specifications include:

• Product Type: Flexible LED Strip

• LED Type: 5050 SMD LED

• Light Color: Cold White

• Color Temperature: Approximately 6000K–6500K

• Operating Voltage: 12V DC

• Length: 5 Meters

• Protection Rating: IP20 (Non-Waterproof)

• PCB Type: Flexible Printed Circuit Board

• Mounting: Self-Adhesive Backing

• Cuttable: Yes (at designated cutting marks)

• Power Supply: Not Included

The 12V Cold White 5050 SMD LED Strip is compatible with:

• 12V DC Power Adapters

• SMPS Power Supplies

• Battery Systems

• LED Dimmers (12V Compatible)

• Arduino (with suitable driver circuit)

• ESP32

• ESP8266

• Raspberry Pi

• Home Automation Controllers

The applications of the 12V Cold White 5050 SMD LED Strip Flexible 5M/Roll include cabinet lighting, shelf lighting, ceiling lighting, under-cabinet lighting, TV backlighting, display lighting, showcase illumination, architectural lighting, indoor decoration, office lighting, exhibition displays, signboard lighting, workshop lighting, educational projects, engineering prototypes, robotics, IoT projects, embedded systems, and DIY electronics.

The advantages of the LED strip include high brightness, low power consumption, flexible design, easy installation, self-adhesive backing, uniform light output, cuttable sections for custom lengths, long service life, lightweight construction, energy-efficient operation, and compatibility with various 12V power sources.

Safety Precautions

• Use a regulated 12V DC power supply with sufficient current capacity.

• Observe correct polarity during power connection.

• Install the strip only in dry indoor environments, as the IP20 rating is not waterproof.

• Avoid excessive bending or twisting of the strip.

• Disconnect the power before cutting or modifying the strip.

• Do not cover the strip completely during operation, as proper heat dissipation is required.

• Keep the strip away from water, moisture, and direct exposure to outdoor weather conditions.

Note: This product includes only the 5-meter LED strip. A compatible 12V DC power supply and optional LED dimmer or controller must be purchased separately if required.

In conclusion, the 12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) is an energy-efficient and versatile indoor lighting solution. Its bright cold white illumination, flexible PCB, easy installation, and compatibility with 12V power systems make it an excellent choice for residential, commercial, educational, robotics, IoT, embedded systems, and DIY lighting applications.